IPA(F)-5 Standart Cast Iron Pump Body Coolant Pump Machinery 600 l/min.  5.5kW 50Hz 2900rpm.

Max. 600 l/min.
Max. 63 m
Depth of immersion from 390 mm to 690 mm

Applications

IPA pump has an additional axial impeller,

 It is used for pumping the liquid foam resulting from high-speed machining operations,

 Pumping metal chips together with the fluid by mixing,

 Filtration systems,

 Hot liquid applications,

 GPA Pumps are used for pumping of cutting / cooling fluids in circulation systems. 

 IPF pumps are used for pumping of liquid from vacuum zone on filtration systems. The pump works at vacuum zone, therefore it has an O-ring at the pump inlet. It also has an additional axial front impeller

Fluid Specifications

Coolants,

Cuting oils,

Grinding oils,

Water,

Fluid temperature 0...80 oC

Kinematic viscosity 1...90 mm2/s

Materials

Pump body : Cast iron - DIN GG 25

Volute : Cast iron - DIN GG 25

Impeller : Investment casting steel - AISI 4140 (DIN 42CrMo4)

Axial (front) impeller : Investment casting steel - AISI 4140 (DIN 42CrMo4)

O-ring : Viton 

Pump shaft : Engineering stell - AISI 1040 (DIN C35)

Electric motor : 3 phase induction motor

2 pole, 3000 rpm

Protection degree IP 55