THREE-PHASE FOOT MOUNTED VIBRATION MOTORS 

Category: II 2 D

Degree of Protection: tD A21 IP66

Temperature Class: 120 °C

ATEX Certificate: ATEX II 2D Extb IIIC (T 120 °C) Db 

Useable zone: Zone 21 and 22

Foot-mounted vibration motors that have maximum 9197 kgf (90,2 kN) centrifugal force are suitable for vibration machine manufacturer and other sectors in industry. 

Miksan Motor’s threephase foot-mounted vibration motors can operate in all confitions and enviroments with high performance. Also, these series have ATEX certification for Zone 21 and 22.

Eccentric Weights

The weights can adjust easily by rotating or subtracting according to the type of the vibration motors.

Casing

Casing of vibration motor is high alloyed aluminium from VA series to VE series. For the casing of vibration motors that have higher centrifugal force (from VE series to VL series) is nodular cast iron (GGG 50).

Eccentric Weights Cover

The eccentric weights cover is sheet metal up to VK series. VK and VL series have aluminium weight covers. The purpose of the eccentric weight covers are protecting the eccentric weights from the external factors and providing the safety.

Insulation Class

Insulation class of our standart range vibrtion motor is F class (155 °C).

Degree of Protection

Degree of protection is IP 66.

Lubrication

Except the vibration motors that used self-lubricated bearings (deep groove ball bearings - 2Z), bearings of the vibration motors (NJ series) are lubricated in our factory. Apart from this, bearings have to be lubricated with the aid of grease nipple that is on the vibration motor case during the maintance. Required grease amount is written in the “ Vibration Motor User’s Manual.

Painting

Vibration motors are painted with RAL 1003 paint by using electrostatic painting method